Usb Main Menu; Update The Firmware; Manage Programs - Hach DR 900 Manual Del Usuario

Option Description
Auto- To maximize battery life, set a time period after
Shutoff which the instrument will automatically set the power
to off if no key is pushed (5, 10, 15, 20, 30 minutes,
1 hour, 2 hours or Disable). Default: 10 minutes
Backlight The display backlight is set to on when
BACKLIGHT is pushed. Set a time period after
which the backlight will automatically power off if no
key is pushed (10, 20, 30 seconds, 1, 2, 5,
10 minutes or Disable). Default: 1 minute
3. Push SETTINGS>Setup>Display & Sound>Sounds.
4. Select an option.
Option Description
Keystroke The instrument will make an audible sound
whenever a key is pushed. Default: off
Reading The instrument will make an audible sound
Complete whenever a reading is complete. Default: on

7.7 USB main menu

When the instrument is connected with a USB cable to a computer, the
USB Main Menu opens. Update the software, export or import programs
or export the data log and event log from the USB Main Menu.

7.7.1 Update the firmware

Find the firmware upgrade file on the product website or contact the
instrument supplier. Save the file from the website to the computer.
1. Set the instrument to on and connect the USB cable to the
instrument and to the computer.
The USB Main Menu prompts.
2. Select Update DR900.
The instrument shows as a USB drive on the computer. Open the
folder.
3. Copy the file DR900.bin to the open folder.
4. Push Ok.
5. When the update is done, push Ok.
6. Select Disconnect USB, push Ok and disconnect the USB cable.
7. Push Ok.
8. Restart the instrument.

7.7.2 Manage programs

With the Manage Programs function, user programs can be exported
and/or imported and new factory programs can be imported.
1. Set the instrument to on and connect the USB cable to the
instrument and to the computer.
The USB Main Menu prompts.
2. Select Manage Programs and select an option:
Option Description
Export User Export all user programs to the computer for
Programs storage or to move the user programs to
another DR 900.
Import User Replace all user programs with the user
Programs programs from another DR 900 via computer.
Import Factory Import new factory programs from the
Programs manufacturer website.
The instrument shows as a USB drive on the computer. Open the
folder.
3. Copy the export file from drive to the computer or copy the import file
from the computer to the drive.
4. Push Ok.
5. When the transfer is done, select Disconnect USB and disconnect
the USB cable.
6. Push Ok.
English 15