Status Bar; Navigation And Main Menu - Hach FH950 Manual Básico Del Usuario

Key
Power On/Off
OK
Up and Down arrows
Quick Jump
Right and Left arrows
Main Menu
Underscore or decimal Puts in an underscore or decimal character. In numeric-only fields, this key automatically
Backspace
Alpha-numeric
Previous menu

5.2 Status bar

A status bar is shown in the top of the display. Descriptions of the information in the status bar are
given in Table 2.
Indicator
Time and Date
USB
Conductivity
Battery
File access
Auto zero depth
indicator

5.3 Navigation and Main Menu

Push OK to confirm a selected menu option or a value shown in the display. Select More and push
OK to see additional screens and options if available. Push the Main Menu button to go to the Main
Menu from a submenu.
Note: Some operations cannot be completed unless a sensor is connected to the meter. If these operations are
tried when there is no sensor connected, the display shows an error message. Connect a sensor and try the
operation again.
14 English
Table 1 Key description
Description
Energizes and de-energizes the meter.
Confirms an entry or highlighted menu option.
Moves up or down in the display. If the cursor is at the top or bottom of the display, the
cursor wraps to the bottom or top when the UP or DOWN arrow is pushed.
In normal operation, this key jumps to the Select conduit shape screen. In profiler
operation, the Quick Jump key is disabled.
If the auto-zero feature is disabled, hold this key for five seconds to do a manual zero of
the depth sensor.
In Real-Time mode, the Quick Jump key toggles between the digital and graph views.
Moves to the right or left in the display.
Moves to the Main Menu from any submenu or screen.
puts a decimal point in the cursor position.
Moves the cursor back one space.
Puts in the key alpha or numeric value. Values are put in the order shown on the key.
After 2 seconds, the value shown in the display is stored and the cursor advances.
Moves to the previous screen.
Table 2 Status bar indicators
Description
Shows the current time and date.
Shows when a USB cable is connected. If a USB cable is connected and this indicator
does not show in the status bar, the USB cable is not fully engaged. Make sure that the
USB cable is pushed in completely and makes full contact with the connection port.
If the sensor is out of the water and non-conductive, a blue ring appears next to the
battery icon. If the sensor is in the water and conductive, the indicator is a solid blue
circle.
A five-bar graph shows the level of charge in the battery.
Shows while the meter gets access to a file.
If the depth sensor was zeroed in the last 30 minutes, a solid green circle shows next to
the Conductivity indicator. If the depth sensor was not zeroed in the last 30 minutes,
this indicator flashes red.