Radio Operation - SOUNDMASTER high line FUR4000 Manual Del Usuario

RADIO OPERATION

- Press the On/Off button (12) to turn radio On.
- Select AM/FM band using the AM/FM band switch (7).
- Select the station using the tuning control (9).
- Turn the volume control (1) to adjust volume as required.
- Press the On/Off button (12) to turn radio off.
Note :
- The AM band use an internal directional aerial, rotate the radio for
best reception.
- Ensure that the FM antenna (18) is completely unrolled and extended
for best FM reception.
SPECIFICATIONS
Frequency : AM 522 – 1620 kHz
FM 87.5 – 108 MHz
Battery backup : 1 x 3V CR2032 flat lithium battery
(not included)
Power source : AC 230V ~ 50 Hz, 5W
RESET
- The reset button (20) is located on the back of unit. Use a ballpoint pen
to press it whenever you change the batteries, or unit is not performing
as expected. This will return all settings to default value, and you will
lose any stored data (alarm and clock settings).
ENGLISH
EN-5