Bluetooth Operation - SOUNDMASTER UR600SW Manual Del Usuario

Bluetooth pairing/connection
1. Press the Power
2. Press the FUNC (function) button (or BT. Button from the remote control) to select Bluetooth mode. The BT
mode LED indicator blinks.
3. From the smart phone, turn on its Bluetooth function and it will search for the neighboring Bluetooth device.
4. From the Bluetooth device list of your smart phone, tap on Bluetooth device name " UR600SW " of this model
for the connection.
5. Once the mobile device connected with the unit, the BT mode LED indicator lights steadily.
Playback smart phone music
6. Run your smart phone music player and playback music.
7. You may adjust both the volume control of your mobile device and the volume control of this unit to find the
most desirable volume setting.
8. You may press:
button to Play / Pause the mobile device music.
(a) the
(b) the TUN +/- button ( or the
FM Antenna
Extend FM antenna wire for the best FM radio reception.
Radio Tuning
1. Press the Power button to turn on the unit.
2. Press the FUNC button (or the RADIO button from the remote control) to select FM radio mode. The FM mode
LED indicator lights steadily.
3. To manually tune to a desired station, repeatedly press the TUN + / - button.
4. To automatically search for stations with strong signals, press and hold the TUN + / - button until the frequency
digits on display begins to scan then release the button. The tuner will stop on the first strong signal it finds.
5. You may press the ST./MONO button from the remote control to select FM radio Stereo or Mono receiving
mode, where the stereo indicator " St " and mono indicator " nO " display respectively.
Radio Preset Stations
The unit allows you to store up to 20 FM stations for easy recall at any time.
Manual preset station channel
1. Press the Power
2. Press the FUNC button to select FM radio mode.
Tune to the radio station you want to store in memory by using the TUN + / - button.
3.
4. Press the MEM button and the preset channel number blinks on display.
To select desired preset channel number, press the TUN + / - button.
5.
6. To confirm preset location, press the MEM button.
7. Repeat steps 3 to 6 to store other stations, if apply.
Recalling Preset Station
In radio mode, press the PRESET button (or the CH +/- button from the remote control) to select the desired preset
radio channel. The preset channel number will appear on display.
3
button to turn on the unit.
/
Radio Tuner Operation
button to turn on the unit.
UR600SW / English Instruction Manual

Bluetooth Operation

button from the remote control) to skip tracks forward / backward.