Multi-Unit Charger - Motorola PMLN6685 Manual Del Usuario

MULTI–UNIT CHARGER
LED
Figure 1: Multi-unit charger overview
OPERATING INSTRUCTIONS
Multi-unit chargers will charge only the Motorola Solutions
authorized batteries listed in Table 1. Other batteries may not
charge.
The charger's pocket accommodate either a radio with a battery
attached or a battery alone. Prior to charging a battery with
radio, turn the radio off. Batteries charge best at room
temperature. To charge a battery with radio, use the following
procedure: (See Figure and Figure 3 ).
Charging Procedure
1. Plug the charger end of the power supply cord into the power
receptacle located at the side of the charger.
2. Plug the wall receptacle end of the power supply cord into the
appropriate AC outlet. A successful power-up sequence is
indicated by a SINGLE GREEN BLINK on the charger
indicator.
3. To charge a radio with battery (with the radio turned off):
Instruction Label
4
Power receptacle (located
here)
Power Supply Cord