Canon imageRUNNER ADVANCE C3330i Guía De Asistencia página 37

02
When loading paper into the paper
drawer for the first time, or when changing
the paper size, adjust the position of the
paper drawer guides.
1. Slide the left guide while squeezing it on the top to
align it with the mark for the desired paper size.
2. Slide the front guide while squeezing it on the top to
align it with the mark for the desired paper size.
IMPORTANT
Slide the guides until they click into place. If the left
guide and front guide are not aligned correctly, the
paper size will not correctly appear on the touch panel
display. It is also necessary to adjust the guides correctly
to avoid causing a paper jam, dirty prints, or making the
inside of the machine dirty.
03
Prepare the paper to load.
Open the packaging for the paper and remove the
paper stack.
NOTE
For high-quality printouts, use paper recommended
)
by Canon.
Before loading paper, always fan the sheets several
)
times, and align the edges to facilitate feeding.
04
Load the paper stack into the paper
drawer.
1. Make sure that the paper size setting of the paper
drawer matches the size of the paper to load in the
paper drawer.
2. Load the paper stack against the right wall of the
paper drawer.
3. Gently push the paper drawer back into the machine.
CAUTION
When returning the paper drawer to its original position,
be careful not to get your fingers caught, as this may
result in personal injury.
Loading Paper 37