Replacing The Staple Case (Inner Finisher-G1) - Canon imageRUNNER ADVANCE C3330i Guía De Asistencia

Replacing the Staple Case
This section describes how to replace the staple case and staple cartridge in the stapler unit. When the Inner
Finisher-G1 is almost out of staples and the staple case must be replaced, a screen prompting you to replace
the staple case appears on the touch panel display. Follow the procedure described below to replace the
staple case.
NOTE
The Inner Finisher-G1 is an optional product.
)
We recommend that you order staple cases from your local authorized Canon dealer before your stock runs out.
)
Use only staple cases intended for use with this machine.
)
01
Open the front cover of the finisher.
02
Pull out the staple cartridge from the
finisher.
1. Push down the green part to unlock the staple
cartridge.
2. Push up the staple cartridge slightly and pull it out.
(Inner Finisher-G1)
03
Pull out the empty staple case from the
staple cartridge.
04
Remove the new staple case from its
box.

Replacing the Staple Case (Inner Finisher-G1)

45