Miele CarClean Set Plus Manual Del Usuario página 61

Ocultar thumbs Ver también para CarClean Set Plus:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Using the Hand Turbobrush m
The Hand Turbobrush is suitable for car
care. It can be used to vacuum car se-
ats, car floor carpets and the carpet in
the boot area of a car.
Caring for the Hand Turbo-
brush
,
Disconnect the vacuum cleaner
from the electrical supply before
cleaning or performing maintenance
work on the Hand Turbobrush. Turn
the vacuum off and remove the plug
from the socket.
Removing threads and hairs
(Illustration n)
^ Using scissors, cut any threads or
hairs that have wrapped around the
brush roller. The cut pieces will be
sucked up by the vacuum cleaner
the next time it is used.
Difficult tangles or blockages can be
removed by opening the roller cover.
^ Turn the grip so that the release
button is in the middle of the guide
(illustration o - a).
^ Press the release button (Illustration
o - b), and pull the grip out from the
Hand Turbobrush as far as possible
(illustration o - c).
^ Lift the upper part of the casing as far
as it will go (iIlustration p), and
remove any debris from the inside of
the casing and from the brush roller.
^ Close the casing and push the grip
back into position until it clicks into
place over the release button.
U
61

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Carclean set vario

Tabla de contenido