SHERCO 125 SE RACING Manual Del Proprietário página 107

MOTOR SETTINGS
1
2
3
4
5
1
2
N1EG LEAN
N1EF
N1EE
N1ED
N1EC RICH
3
Pilot jet and pilot (air) screw:
In order to adjust the idle range A to B transition you
can change the pilot jet
it) and adjust the air screw
richens the mixture.
Proceed by turning the screw 1/8 of a turn at a time,
if you move out of the rage of 1T-2.5T, change the
size of the pilot jet.
Needle:
The needle has 5 notches for adjustment, 1 to 5,
from rich to lean.
The reference number of the needle is engraved on it.
In the tables the adjusting position of the clip on the
needle is defined from the upper position.
Main jet:
The main jet is shown in the photo as
The size of the jet is engraved on it.
(its size is stamped on
1
, turning the screw in
2
.
3
107