ADJUSTING THE CHASSIS
ADJUSTING THE STEERING ANGLE
BASIC SETTING OF THE CHASSIS ACCORDING TO THE RIDER WEIGHT
The steering angle can be changed using the set
1
screws located on the bottom of the steering column.
Loosen the nut
you have the steering angle desired.
Tighten the nut and do the same operation on the
other side.
2
Steering angle
lock nut
If the weight of the rider is above or below the
standard, compensate by changing the stiffness of
the springs (forks and shock).
Standard weight of therider
(with equipment)
and tighten the screw
1
M8
20Nm
75 to 85kg
until
2
111