Kit Assembly - Metra 99-7368 Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Secure the pocket to the radio brackets
with the (2) #8 x 3/8" Phillips screws
supplied. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio between the radio
brackets and secure with screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Test the radio for proper
operation.
5. Reassemble the dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 11/27/2017 INST99-7368
5