Dash Disassembly - Metra 99-7345B Instrucciones De Instalación

1. Unsnap and remove the trim from
around the radio and climate control.
(Figure A)
2. Unsnap the driver's side panel from the
outside edge of the dash. (Figure B)
3. Remove (2) screws from the knee panel
and pull the top of the panel back so it
doesn't overlap the instrument cluster.
(Figure C)
4. Remove (2) screws from the driver's side
vent trim and remove. (Figure D)
(Figure A)
2

DASH DISASSEMBLY

(Figure B)
(Figure C)
5. Remove (5) Phillips screws from the
instrument cluster panel, and then pull
the panel out towards the steering
wheel. Unplug all harnesses, making
sure not to damage any wires or
connectors in the process. (Figure E)
6. Remove (4) Phillips screws securing the
climate controls, and set aside for kit
assembly. (Figure F)
Continued on the next page
(Figure D)
(Figure E)
(Figure F)
|
1.800.221.0932 MetraOnline.com