Intended Use - Hilti SF BT 22­A Manual Del Usuario

3 Description
3.1 Overview of the product
3.2

Intended use

The product described is a hand-held cordless drill designed for drilling blind holes in steel using Hilti
TX­BT... stepped drill bits which is a prerequisite for driving Hilti X­BT threaded studs.
• Use only Hilti lithium­ion batteries of the B 22 series with this product.
Use only Hilti-approved battery chargers to charge these batteries. More information is available from
•
your Hilti Store or from www.hilti.group
3.3 Switch-on interlock
The tool is equipped with a switch safety lock that can be used to lock the control switch, thereby preventing
inadvertent starting.
Switch positions
• If the switch safety lock is positioned longitudinally, i.e. in line with the working direction of the drill, the
control switch is locked (the switch-on interlock is active).
• If the switch safety lock is pointing to the left relative to the working direction of the drill, the control
switch is free to operate (the switch-on interlock is deactivated).
3.4 Overload and overheating protection
The power tool is equipped with an electronic system to protect against overloading and overheating. The
power tool switches itself off automatically in the event of overloading or overheating. After releasing the
control switch, the power tool may not restart immediately when the switch is pressed again (while the power
tool is cooling down).
Activation of the automatic cut-out is indicated by all 4 LEDs on the battery display blinking.
*2127431*
1
@
;
=
%
&
(
)
+
§
/
2
2127431
Keyless chuck
Motor cooling air intake
Grip
Switch safety lock
Control switch (with electronic speed control)
Belt hook
Battery
Air exit
Battery release button
Battery display
English 15