Dash Disassembly - Metra 99-7629S Instrucciones De Instalación

Vehicle:
1. Unclip and remove the climate-
control/radio panel. (Figure A)
2. Remove (4) screws securing the
radio to the sub-dash and then
remove. (Figure B)
(Figure A)

Dash Disassembly

(Figure B)
OFF
(Figure C)
99-7629S
Climate-control/radio panel:
3. Unsnap and remove the (3) outer
trim rings from the climate control
knobs. (Figure C)
4. Remove (4) T-10 Torx screws to
separate the factory radio trim
panel. (Figure D)
5. Unclip and remove the hazard light
switch assembly.
6. Remove (2) T-10 Torx screws
securing the passenger air bag
light assembly and then remove.
(Figure D)
Note: The small round sticker also
needs to be removed from the
factory panel and placed onto the
99-7629S radio trim panel.
Continue to kit preparation
2
INSIDE VIEW - RADIO TRIM PANEL BACK
1
A/C CONTROL PANEL
2
PASSENGER AIR BAG LIGHT
1
CLIP
T-10 TORX T-10 TORX
HAZARD SWITCH
SCREW SCREW
(Figure D)
3
4
2