GM 19165569 Instrucciones De Instalación

GMT900 Pick-Up Instrument Panel DIC
Switch
Contents
Description
Trim plate
DIC Switch
Required Tools
Flat-bladed Plastic trim tool
Installation Instructions
1. Remove the left instrument panel outer trim cover. Figure 1.
FIGURE 1
2. Remove the park brake release handle.
3. Remove the bolt that attaches the park brake release handle
to the knee bolster. Figure 2.
FIGURE 2
PARK BRAKE
RELEASE
HANDLE BOLT
GMT900 Pick-Up Instrument Panel DIC Switch
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
Quantity
1
1
PARK BRAKE
RELEASE
REVISION
23JN06
4. Remove the park brake release handle from the knee bolster.
5. Remove the two knee bolster assembly screws . Figure 3.
FIGURE 3
KNEE BOLSTER
ASSEMBLY SCREW
6. Remove the knee bolster assembly from the instrument
panel.
7. Use a flat-bladed plastic trim tool to release the 6 retainer
clips that secure the left side trim plate to the instrument
panel. Figure 4.
FIGURE 4
HANDLE
IR 23JN06
INSTALLATION INSTRUCTIONS
AUTH DR
TITLE
GMT900 Pick-Up Instrument Panel DIC Switch
PART NO.
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19165569
PART NO.
19165569
SHEET
KNEE BOLSTER
ASSEMBLY
FRONT
1 6
SHEET OF
6
1
OF