smartheart 01-540 Manual De Instrucciones

Automatic Digital
Blood Pressure Wrist Monitor
Model # 01-540
THIS QUICK START GUIDE IS INTENDED
AS A SUPPLEMENT TO THE INSTRUCTION
MANUAL. PLEASE READ THE COMPLETE
MANUAL PRIOR TO FIRST USE.
Before applying your blood pressure cuff, be sure your
wrist is within the appropriate range:
Wrist Circumference Range Suitable for
5.5" – 7.6" (14 cm – 19.5 cm)
A 15 minute resting period is needed to stabilize the
body prior to taking a reading. No eating, drinking or
smoking while resting.
Applying the Wrist Cuff
1. Be seated at a table or desk
with your feet flat on the floor.
Hold your left arm in front of
you with your palm facing
upward.
2. Apply the preformed cuff to
your left wrist so that the digital
display face is positioned on the
inside area of your wrist facing
you.
IF YOU HAVE ANY QUESTIONS OR ARE EXPERIENCING DIFFICULTIES, PLEASE CALL THE TOLL-FREE
CUSTOMER SERVICE HELP LINE FOR FURTHER ASSISTANCE AT 1-866-326-1313.
3. Adjust the cuff approximately 0.5" from the edge
of the head of the ulna bone. The cuff should fit
comfortably, yet snugly around your wrist.
Taking the Measurement
1. Rest your elbow on a solid
surface with your palm
facing upward. Elevate
your arm so that the cuff is
at the same level as your
heart. Be certain that cuff is
elevated to the proper level;
you may choose to support
your hand with a folded
towel or book. Relax your left hand.
2. Press the START button to turn the unit on; the unit will
run a selftest, Fig 1.
3. The cuff will automatically
inflate to approximately
190mmHg or 40 mmHg
higher than the last systolic
pressure reading stored in
memory.
4. When the measurement
is complete, your blood
pressure measurement and
pulse will display separately
on the screen alternating
repeatedly every 2-3
seconds, Fig 2. The systolic
and diastolic readings will
display at the same time.
5. Consult the included
Instruction Manual for
information on interpreting
your reading results.
6. The results will automatically
be stored in memory up to
60 readings.
7. Select START to turn the unit off and conserve energy
and battery life. The unit will automatically shut-off
and revert to time/date mode after approximately 1
minute.
Please Note:
• You can stop the inflation or deflation process of the
cuff at any time by pressing the START button.
• Many factors such as genetics, age, sex, altitude,
physical activity, anxiety, muscular development,
certain medications or even the time of day can
influence blood pressure.
• Blood pressure varies from moment to moment; even
readings taken after proper rest periods can vary.
Home blood pressure readings may vary as much as
10-20 points from ones taken at your doctor's office.
• Variations in your individual readings should only be
interpreted by your physician or trained health care
professional.
• We encourage you to consult with your physician
to achieve the maximum benefit from your blood
pressure monitor.
MEM
Fig. 1
Fig. 2
Fig. 3
#93-2032 10/19
©2019 Veridian Healthcare, LLC