Safety Devices - Prebena 3X-CNW50 Manual De Instrucciones Original

Safety devices

Triggering safety device
The fastener driving tool is equipped with a triggering safety device
on the tool tip. The trigger can only be enabled if the triggering safety
device is pressed in.

Use the fastener driving tool only with a functioning triggering safety
device.

Trigger the fastener driving tool only when the tip of the workpiece
is firmly pressed against the material.
Information signs on the fastener driving tool
The following types of use are not permitted when triggering is set
to "repeated triggering":

tasks that require movements over scaffolding, stairs, ladders
or structures similar to ladders and

using this setting to close boxes or crates or to mount transport
safety devices.
In addition to the rating plate, three other stickers are placed on the tool.
Their meaning is as follows:
WARNING
Very severe injuries when operating the fastener
driving tool with a faulty or bypassed triggering
safety device.
The corresponding warning symbol appears
on a sticker on the top of the fastener driving tool.
Description
13