Prebena 3X-CNW50 Manual De Instrucciones Original página 68

Preparation of the fastener driving tool

Do not point the fastener driving tool at people or animals.

Empty the magazine before connecting.

Check the compressed air system and the fastener driving tool
for damage before making the connection.

Connect the fastener driving tool only to a functioning compressed
air system.
PLEASE NOTE
Damaged hose lines may burst and lead to material damage due to
escaping compressed air.

Check the compressed air system and the fastener driving tool
for damage before making the connection.

Connect the fastener driving tool only to a functioning compressed air
system.

Push the quick lock (1) of the compressed air hose
onto the connection (2), until it audibly engages.

Check the operating pressure on the pressure indicator
of the compressor.
The maximum permitted operating pressure of fastener driving tools
3X-CNW50, 4X-CNZ45, 5F-CNW65, 7F-CNW90, 8XR-CNW90 and
9F-CNW100EPAL is 8.3 bar.
18
WARNING
Accidental triggering while making the connection
to the compressed air supply may result in severe
or fatal injuries.
CAUTION
Damaged hose lines may burst and lead to injuries.