Daikin BRC1E73 Manual Del Usuario página 8

Prepare the wiring for connection to the remote controller following these instructions:
Remove the wire jacket
and insulation
Length of jacket to be removed:
● Approx. 6 inch for top left outlet
● Approx. 8 inch for top center outlet
Connect the terminals (P/P1, N/P2) of the remote controller to the terminals (P1, P2) of the
indoor unit. (P1 and P2 are not polarity sensitive.)
3-5-1 Back outlet
Upper case
Wire tie
Wire attachment
point
6
All manuals and user guides at all-guides.com
Cutting guideline
Printed-circuit
board
<Wire attachment guideline>
Approx. 3/8 inch
To simplify the wiring, maintain
a 3/8in difference between the
length of the two conductors.
Indoor unit
P1 P2
Lower case
Wire tie
Cross-section
Secure the wire at the
attachment point by
using furnished wire
tie.
-
English