Charging Procedure - Motorola IMPRES 2 PMPN4350 Guia Del Usuario

Charging Procedure

1. Plug the charger end of the power supply cord into the power
receptacle located at the back of the charger.
2. Plug the wall receptacle end of the power supply cord into the
appropriate AC outlet. A successful power-up sequence is indicated
by a Single Green Blink on the charger indicator.
3. Insert a radio with an IMPRES battery or a stand alone IMPRES
battery, into the charger pocket:
a. Align the radio/battery contacts with the contacts in the charger
pocket.
b. Pressing the radio/battery into the pocket, ensuring complete
contact between charger and radio/battery contacts.
c. Once the IMPRES battery is properly seated into the pocket, the
charger indicator illuminates, indicating the charger has
Charging radio
with battery
5
Charging battery