Cata AG6-A600 GBK Instrucciones Para La Instalación, El Uso, El Mantenimiento página 20

9. Equip the inside chimney and outside chimney: Install the outside chimney bracket
on the outside chimney with 2pcs ST4*8mm screws, make sure that the inside
chimney could be moved inside freely, see Pic 5.
10. Fix the chimneys onto the cooker hood : Use 2pcs of ST4*8mm screws to fix the
outside chimney bracket onto the cooker hood,then fix the outside chimney bracket
on the wall with ST4*40mm screws.See Pic 6.
11. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix it with 2pcs ST4*8mm screws. See Pic 7.
HINTS FOR EXHAUST DUCT INSTALLATION
The following rules must be strictly followed to obtain optimal air extraction:
•
Keep exhaust duct short and straight.
•
Do not reduce the size or restrict the exhaust duct.
•
When using the flexible duct always install the duct pulled taut to minimize
pressure loss
•
Failure to observe these basic instructions will reduce the performance and
increase noise levels of the range hood.
•
Any installation work must be carried out by a qualified electrician or competent
person.
•
Do not connect the ducting system of the hood to any existing ventilation system
which is being used for any other appliance ,such as warmer tube, gas tube , hot
wind tube.
inside chimney
ouside chimney bracket
outside chimney
Pic 5
20