Site Preparation Requirements; Physical Space Requirements; Unloading Route - HP Designjet L26100 Serie Manual De Instrucciones

2

Site preparation requirements

Physical space requirements

Unloading route

The route between the unloading area of the printer and the installation site, including any corridors
and doorways through which the printer must be transported, is important to proper site preparation
and must be checked before the arrival of the printer. This pathway must be clear when the printer
arrives.
Table 2-1 Printer physical specifications
Length
Width
Height
Weight
Doorways: minimum width 1.01 m (40 in) × minimum height 1.67 m (66 in) required.
The space required for assembly is 3 m (10 ft) in front and 1 m (3.5 ft) at the sides and rear.
Most of the installation process requires one person, but four people are required to perform certain
tasks.
2 Chapter 2 Site preparation requirements
All manuals and user guides at all-guides.com
Printer
2.47 m (97 in)
0.69 m (27.5 in)
1.37 m (54 in)
290.1 kg (639.6 lb)
With packaging
2.69 m (105.9 in)
0.81 m (31.9 in)
1.18 m (46.6 in)
403.1 kg (888.7 lb)
ENWW