Barrette 34111492 Manual Del Usuario página 12

16.
Assemble post base trim over plate. Take one
side of trim ring and push plastic plugs through
hole underneath. Take second half of the trim ring
and push together (Fig. 20). Slide over plate for a
finished look.
Transitioning from Full Privacy to Half Privacy Panel
1.
If transitioning to a half-privacy panel from the full privacy panel (Fig 1), use the 36"
transition cover provided in post kit to conceal top of Line or Corner post.
The transition cover is installed by snapping or sliding from the top of the post and
sliding down into place (Fig. 2).
Transition cover will need to be cut back 6" if half-privacy panel is installed at 42".
Cover works as is for 36" high rail.
42 ⁄ "
3
8
Fig. 1
72 ⁄ "
5
8
Transition Cover
Fig. 20
Fig. 2