Diode Test - Klein Tools CL600 Manual De Instrucciones

All manuals and user guides at all-guides.com
ENGLISH
OPERATING INSTRUCTIONS

DIODE TEST

1. Insert RED test lead into V jack
COM jack , and rotate function selector switch
4
Diode-Test setting.
2. Touch test leads to diode. A reading of 200-800mV on display
indicates forward bias, "OL" indicates reverse bias. An open
device will show "OL" in both polarities. A shorted device will
show approximately 0mV.
Black lead Red lead
12
, and BLACK test lead into
5
to the
2