Searching For Errors; Guarantee - Waeco MagicWatch MWE150 Instrucciones De Montaje Y De Uso

MWE-150-2.book Seite 38 Freitag, 3. Februar 2006 4:52 16
All manuals and user guides at all-guides.com

Searching for errors

10 Searching for errors
The device indicates no function.
The cables to the reversing light are not connected or are switched.
The plug for the piezoelectronic speaker is not connected or is not properly
plugged into the control electronics.
The plugs for the sensors are not connected or are not properly plugged into
the control electronics.
➤ Check the plugs, and plug them in so that they latch in place.
A defective sensor is indicated (three beeps when you engage reverse
gear)
If a defective sensor is indicated (see the "Testing functions" chapter on
page 36), this is what to do:
➤ Park the vehicle about a meter away from a large obstacle, such as a ga-
rage door.
➤ Engage reverse gear.
✓ The slow beeps sound (Zone 1, 5, page 5).
➤ Then stand in front of each sensor in succession.
✓ The beeps speed up. The beeps do not change on the defective sensor.
11

Guarantee

Our general guarantee conditions apply. If the product is defective, please re-
turn it to the WAECO branch in your country (see the back of the instruction
manual for the addresses) or to your dealer. For repair and guarantee pro-
cessing, please include the following documents when you send in the de-
vice:
A copy of the receipt with purchasing date,
A reason for the claim or description of the fault
38
MagicWatch MWE150