Legal Information; Technical Data - Ottobock 8S500-AxonSkin Visual+Black Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
Heavy soiling
>
Materials required:
640F12 Special Cleaner, 640F13 Pump Sprayer, clean, undyed cloth (e.g. cellulose, linen),
water, lint-free cloth
1) NOTICE! Clean the product promptly to avoid heavy dirt from permanently contaminat­
ing the material.
Spray the special cleaner on to the soiled area of the product and leave to take effect for a
short time.
2) Wipe off the dirt from the product with a clean, undyed cloth using light pressure.
3) Rinse off residual cleaner and dirt with water.
4) Dry the product with a lint-free cloth and allow it to air dry fully.
Removal of nail varnish
Materials required:
>
Nail varnish remover (acetone-fee), clean, undyed cloth (e.g. cellulose, linen), water, lint-free
cloth
1) Remove the nail varnish from the product with nail varnish remover and a clean, undyed cloth,
using light pressure.
2) Rinse off residual cleaner and dirt with water.
3) Dry the product with a lint-free cloth and allow it to air dry fully.
7 Disposal
This product may not be disposed of with regular domestic waste in all jurisdictions. Disposal that
is not in accordance with the regulations of the country where the product is used may have a det­
rimental impact on health and the environment. Please observe the information provided by the
responsible authorities in the country of use regarding return, collection and disposal procedures.

8 Legal Information

All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
8.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modification of the product.
8.2 CE Conformity
This product meets the requirements of the European Directive 93 / 42 / EEC for medical devices.
This product has been classified as a class I device according to the classification criteria out­
lined in Annex IX of the directive. The declaration of conformity was therefore created by the man­
ufacturer with sole responsibility according to Annex VII of the directive.

9 Technical data

Reference Number
Men's version
Women's version
Unisex version
Sides
Sizes
Colours
20 | Ottobock
AxonSkin Natural
8S501=*
8S502=*
2, 4, 6, 8, 11, 14, 16
AxonSkin Visual
8S500=*
right (R), left (L)
M
0
AxonSkin Black
8S500=*
20

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8s501-axonskin natural8s502-axonskin natural

Tabla de contenido