Publicidad
Idiomas disponibles
Idiomas disponibles
Scope of supply
1x bracket, clutch cover protection
1x protector
2x countersunk screw M5x10
1x collar screw M6x35
1x collar screw M6x30
2x spacer
1x Metamoll
Preassembly
- Position protector
on bracket
(both included).
- Mount and tighten screws
(included).
- Stick on Metamoll
(included).
- Position spacers
(included).
Assembly
- Lay vehicle on its side.
- Remove screws
.
- Release the remaining screws of the clutch cover.
Place a suitable container under the engine. Engine oil may
escape!
- Position the preassembled clutch cover protection.
- Mount screw
(included), but do not tighten yet.
- Mount screws
(included) but do not tighten them yet.
- Tighten all screws on the clutch cover in a crisscross pattern to
10 Nm.
Final steps
- Check engine oil level, add if necessary.
4
Publicidad
