Changing The Display Behavior - Dell PowerEdge 1655MC Manual Del Usuario

0w440eb1.fm Page 20 Monday, October 28, 2002 2:23 PM
To assign names to servers:
1
2
3
4
5
6

Changing the Display Behavior

Use the Menu dialog box to change the display order of server modules and set a screen
delay time for OSCAR.
1
2
3
4
To set a screen delay time for OSCAR:
1
1-20 System Configuration Guide
All manuals and user guides at all-guides.com
In the Names dialog box, select the name or slot number you want to change and click
Modify.
The Name Modify dialog box appears.
Type a name in the New Name box.
Names of servers may be up to 15 characters long. Legal characters include: A–Z, a–z,
0–9, a space, and a hyphen.
Click OK to transfer the new name to the Names dialog box. Your selection is not
saved until you click OK in the Names dialog box.
Repeat step 1 through step 3 for each server module in the system.
Click OK in the Names dialog box to save your changes.
NOTE: The server module names are not saved unless you click OK.
Click X or press <Esc> to exit the dialog box without saving changes.
Press <Print Screen> to launch OSCAR.
The Main dialog box appears.
Click Setup-Menu.
The Menu dialog box appears.
Select Name to display servers alphabetically by name, select EID to display server
modules numerically by EID number, or select Slot to display servers numerically by
slot number.
Click OK.
Type the number of seconds (0–9) that you want to delay the display of OSCAR after
you press <Print Screen>.
Entering 0 instantly launches OSCAR without delay.