Switching-Off Servo Flash Mode - Metz mecablitz 52 AF-1 Canon digital Manual De Instrucciones

Setting procedure for the learn function
The AF pre-flash function of the camera must
be switched off.
SYNC
M-SERVO
• Press the
Z
35 mm
OOM
INFO P
SYNC
• Press the
Learn
• "Learning Mode" is ready to learn.
k
• Press the release button on the camera so
The macablitz 52 AF-1 digital has learned the
flash of the camera flash unit.
176
SYNC
sensor buttons on the
touch display as many times as it takes for
the selection to appear.
Learn
sensor button on the touch
display.
that the camera's own flash unit is
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the
display as confirmation.

10.4.5 Switching-off SERVO flash mode

SYNC
• Press the displayed mode of operation on
M-SERVO
the touch display as many times as it takes
for the display for selecting the mode of
Z
35 mm
OOM
operation to appear.
INFO 1/16
SLAVE
• Press the
SERVO
touch display and select the desired mode
of operation, e.g
E TTL • Press the sensor button on the touch
display for the mode of operation, e.g
E TTL HSS
E TTL
.
The selected mode of operation is adopted.
sensor buttons on the
E TTL
.