Sauder 420449 Instrucciones De Montaje página 15

Step 11
NOTE: When turning your unit over, do not lift on the BRACES (F).
å
Carefully turn your unit over onto its front edges. Unfold the
å
BACK (I) and lay it over your unit.
Make equal margins along all four edges of the BACK (I). Push on
å
opposite corners of your unit if needed to make it "square".
Fasten the BACK (I) to your unit using the NAILS (1N).
å
NOTE: When nailing along the BRACES (F), support the BRACES
å
to keep them even with the BACK and solid.
NOTE: Be sure to tap NAILS into the holes that line up over
å
the UPRIGHT (C).
These holes must line up
over the UPRIGHT (C).
www.sauder.com/service
This perforated hole needs
to be at the top of the unit.
F
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
(45 used for the BACK)
I
420449
1N
NAIL
F
Page 15