Sauder 420449 Instrucciones De Montaje página 19

Step 15
Carefully stand your unit upright in its fi nal location. We recommend using the SAFETY STRAP for added stability.
å
Open the FURNITURE TIPPING RESTRAINT KIT (97) and fasten the SAFETY STRAP to the TOP (D). Use the provided
å
BLACK 9/16" LARGE HEAD SCREW.
Carefully cut out the perforated hole in the BACK (I). Insert the other end of the SAFETY STRAP through this hole.
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR into a wall stud. If you prefer to fasten the SAFETY
å
STRAP to a wall stud, go to your local hardware store for proper hardware.
INSTALLATION INSTRUCTIONS:
å
1. Insert the SAFETY DRYWALL ANCHOR through the WASHER and one end of the SAFETY STRAP.
2. Using a Phillips screwdriver or a hand drill, press the screw slightly onto the drywall.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon sheath slips through.
4. Turn the screw until it is fl ush against the wall and you feel a fi rm resistance.
5. Continue to turn until the screw starts spinning freely.
NOTE: Before moving your unit to a diff erent location, unscrew the SAFETY DRYWALL ANCHOR from your wall. The
å
nylon sheath will remain behind your wall.
www.sauder.com/service
D
I
97
BLACK 9/16" LARGE HEAD SCREW
(1 used for the SAFETY STRAP)
420449
Washer
Safety
drywall
anchor
Safety strap
Page 19