Setting The End Limits - SOMFY Pergola io Manual Para El Instalador

Ocultar thumbs Ver también para Pergola io:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
Pergola io

5.4. Setting the end limits

The end limit setting depends on the type of awning.
5.4.1. Automatically setting the end limits for tensioned Pergola awnings
The upper and lower end limits are set automatically.
1) Press the Up and Down buttons simultaneously: the
awning moves briefly.
2) Press the "my" button until the awning moves briefly:
the end limits have been programmed, go to the section
"Programming the first Somfy io local control point".
5.4.2. Semi-automatically setting the end limits for
tensioned Pergola awnings
The lower end limit is set automatically, while the upper end limit must be set manually.
It is always possible to define a new upper end limit
before programming it.
Setting the upper end limit
1) Position the awning at the upper end limit.
Press and hold the Up button for > 2 seconds to raise
the awning in one continuous movement.
2) Stop the awning at the desired point.
3) If necessary, adjust the position of the awning using the
Up or Down buttons.
4) Press the "my" and Down buttons simultaneously: the
awning will be lowered in one continuous movement,
even after the "my" and Down buttons have been
released.
5) At mid-height, briefly press the "my" button to stop the
awning.
6) Press the "my" button again until the awning moves
briefly: the end limits have been programmed, go to the
section "Programming the first Somfy io local control point".
5.4.3. Manually setting the end limits for untensioned Pergola awnings
The upper and lower end limits must be set for untensioned Pergola awnings.
It is always possible to define new upper or lower end limits before programming them.
Setting the upper end limit
1) Position the awning at the upper end limit.
Press and hold the Up button for > 2 s to raise the
awning in one continuous movement.
2) Stop the awning at the desired point.
3) If necessary, adjust the position of the awning using the
Up or Down buttons.
4) Press the "my" and Down buttons simultaneously: the
awning will be lowered in one continuous movement,
even after the "my" and Down buttons have been
released.
5) At mid-height, briefly press the "my" button to stop the
awning, and go to the section "Setting the lower end
limit".
46
Copyright © 2010-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
1
2
1
2
3
4
5
6
1
2
3
4
5
Setting the lower
2 s
2 s
end limit.

Publicidad

Tabla de contenido
loading

Tabla de contenido