WEG CFW701 Manual Del Usuario página 43

Option Kits and Accessories
WEG Part
Name
Number
11511558 USB-RS-485/RS-422
11355980 MMF-02
11402038 CCK-01
Stand-alone Keypad, Blank Cover, and Frame for Remote Mounted Keypad
11829628 HMI-03
11829782 RHMIF-03
10950192 1 m HMI CAB-RS _1M
10951226 2 m HMI CAB-RS _2M
10951223 3 m HMI CAB-RS _3M
10951227 5 m HMI CAB-RS _5M
10951240 7.5 m HMI CAB-RS _7.5M
10951239 10 m HMI CAB-RS _10M
11010298 HMID-01
11401877 KN1A-02
11401938 KN1B-02
11401857 KN1C-02
10960842 KN1E-01
10960850 KN1E-02
11401939 KIP21A-01
11401941 KIP21B-01
11401940 KIP21C-01
11010264 KIP21D-01
11010265 PCSA-01
11010266 PCSB-01
11010267 PCSC-01
11119781 PCSD-01
10960844 PCSE-01
12705234 PCSC-03
10960847 CCS-01
11829630 CONRA-03
10790788 DBW030380D3848SZ
10794631 DBW030250D5069SZ
Notes:
(1) The identification of the MMF-02 module is presented in the bit 6 of the parameter P0028. Refer to CFW701 programming
manual.
(2) Use DB-9 pin, male-to-female, straight-through cable (serial mouse extension type) for connecting the keypad to the
inverter or Null-Modem standard cable. Maximum cable length: 10 m (33 ft).
Examples:
- Mouse extension cable - 1.80 m (6 ft); Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m (17 ft); Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
(3) Refer to Figure B.2 on page
38 | CFW701
Table 7.1: Accessory models
Control Accessories
USB-RS-485/RS-422 Interface kit.
Flash Memory Module
FLASH memory module.
Expansion Module
Output relays module.
CFW701 stand-alone keypad (HMI).
Remote keypad frame kit (IP56).
1 m serial remote keypad cable set.
2 m serial remote keypad cable set.
3 m serial remote keypad cable set.
5 m serial remote keypad cable set.
7.5 m serial remote keypad cable set.
10 m serial remote keypad cable set.
Blank cover for the keypad slot.
Miscellaneous
Nema1 kit for frame size A inverter.
Nema1 kit for frame size B inverter.
Nema1 kit for frame size C inverter.
Nema1 kit for models 105 A and 142 A of
frame size E inverter.
Nema1 kit for models 180 and 211 A of frame
size E inverter.
IP21 kit for frame size A inverter.
IP21 kit for frame size B inverter.
IP21 kit for frame size C inverter.
IP21 kit for frame size D inverter.
Kit for power cables shielding - frame size A.
Kit for power cables shielding - frame size B.
Kit for power cables shielding - frame size C.
Kit for power cables shielding - frame size D
(included in the standard product).
Kit for power cables shielding - frame size E
(included in the standard product).
Kit for power cables shielding - frame sizes B
and C with degree of protection IP55.
Kit for control cables shielding (included in
the standard product).
CFW701 Control Rack (includes the CC701.
CDE control board and it is supplied with the
product).
380...480 Vac dynamic braking module.
500...690 Vac dynamic braking module.
169.
Description
(2)
(3)
(3)
(3)
(3)
(3)
Identification
Slot Parameters
- P0028
- -
5 --xx
(1)
- -
HMI -
- -
- -
- -
- -
- -
- -
- -
HMI -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -