Secury 2116 S / 2119 S (With Monitoring Contacts); 2.3.4 Secury 2170 Evp / 2116 S Evp - G-U BKS SECURY 21 EK Serie Instrucciones De Montaje

All manuals and user guides at all-guides.com
The following lock functions are available as potential-free contacts:
 
Position of the cylinder cam / key (initial position or actuated)
 
Outside lever handle (actuated or not actuated)
 
Inside lever handle (actuated or not actuated)

2.3.3 SECURY 2116 S / 2119 S (with monitoring contacts)

The multi-point lock is equipped with an automatic lock and mechanical
panic function (panic function E).
The function is identical to the multi-point locks SECURY 2116 / 2119 (see
EN 179
general instructions M -00090-00-0).
Opening the door in escape direction is possible at any time.
The following lock functions are available as potential-free contacts:
 
EN 1125
Latchbolt (locked or not locked)
 
Position of the cylinder cam / key (initial position or actuated)

2.3.4 SECURY 2170 EVP / 2116 S EVP

The SECURY 2170 EVP and 2116 S EVP multi-point locks (EVP = electrically
locking ) correspond with the SECURY 2170 (Chap. 2.3.1) and/or 2116 S
(Chap. 2.3.3) multi-point locks, but are equipped with an additional latch.
EN 179
This additional latch is not retracted when the lever and/or profi le cylinder
is actuated. In combination with an escape door control unit and an escape
door strike (escape door strike type B 5465), it is used for escape route
security.
EN 1125
When the door in the escape direction (panic side) is actuated, the escape door
strike holds the door closed using the additional latch until it is released by a
signal from the escape door control unit. The door can be released using the
key switch on the escape door control unit or, in case of an alarm, using the
emergency switch.
Through the locking cam monitoring, a short-term release of the escape
door is possible in case of a corresponding connection.
37