Nozzles; Power Dial - Generac 0068090 Manual Del Usuario

3. See Figure 2-15. Connect high-pressure
hose to base of spray gun and hand-
tighten.
Figure 2-15. Connect High-Pressure Hose to
Spray Gun
Spray Gun
Become familiar with spray gun trigger and
locking system prior to use.
See Figure 2-16. With unit OFF, hold spray
gun and squeeze trigger to learn how trigger
mechanism and locking system can be acti-
vated and deactivated.
Figure 2-16. Spray Gun (typical)
4. Verify spray gun is OFF with lock engaged
before starting power washer.
5. Turn ON the water, squeeze the trigger to
purge the pump system of air.
Blast
Pressure
Nozzle
(Red)
Clean
Pressure
Nozzle
(Green)
Detergent
Nozzle
(Black)
Operator's Manual for Power Washer
NOZZLE
Blast
Wash

Nozzles

1. See nozzle selection guide and select cor-
rect nozzle for task.
2. See Figure 2-17. Pull back quick–connect
collar and install nozzle
000122
3. Release quick-connect collar to secure
nozzle.
4. Verify nozzle is locked in place.

Power Dial

1. See Figure 2-18. Turn Power Dial to match
material you would like to clean.
000123
PSI / kPa
3000 / 20684
2400 / 16547
.
Figure 2-17. Insert Nozzle
Figure 2-18. Power Dial
Gallons per minute /
Liters per minute
2.3 / 10.5
2.5 / 11
000125
000388
000375
7