Ryobi P3650 Manual Del Operador página 10

LASER GUIDE BUTTON
See Figure 2.
Press the laser guide button to manually activate the laser guide.
MITER LOCK KNOB
See Figure 3.
The miter lock knob securely locks the saw at desired miter
angles. Turn the knob clockwise to lock the saw in place and
counterclockwise to release the saw.
MITER SCALE
The miter scale has index points provided at 0°, 15°, 22.5°, 30,
31.6°, and 45°.
POSITIVE STOPS ON MITER TABLE
Positive stops have been provided at 0°, 15°, 22.5°, 31.6°, and
45° on both the left and right side of the miter table.
NOTE: To bypass the positive stops, squeeze the detent release
lever, lift the detent override, then release the detent release
lever. To release the override, squeeze the detent release lever.
SELF-RETRACTING LOWER BLADE GUARD
The lower blade guard is made of shock-resistant, see-through
plastic that provides protection from each side of the blade. It
retracts over the upper blade guard as the saw is lowered into
the workpiece.
SLIDE BARS
When unlocked, the saw arm will glide forward and backward
the length of the slide bars for cutting various workpiece widths.
SLIDE LOCK KNOB
The slide lock knob locks and unlocks the sliding feature of
this tool.
SLIDING MITER FENCE
The sliding miter fences help hold the workpiece securely
when making most cuts. The sliding feature allows for clear-
ance of the saw blade when making bevel or compound cuts.
Some cuts may require that the sliding fence be removed
completely to avoid interference between the fence and
the blade.
Loosen the fence screw before attempting to slide the fence
or lift it for removal. Once the desired position of the fence
is determined, retighten the fence screw securely.
SPINDLE LOCK BUTTON
See Figure 4.
The spindle lock button locks the spindle and stops the blade
from rotating. Depress and hold the lock button while installing,
changing, or removing blade.
All manuals and user guides at all-guides.com
FEATURES
SWITCH TRIGGER
See Figure 4.
To prevent unauthorized use of the compound miter saw, remove
the battery packs from the tool and lock the switch in the off
position. To lock the switch, install a padlock (not included)
through the hole in the switch trigger and make certain the switch
is inoperable. If the switch is still operable with the padlock
installed, a padlock with a larger shackle diameter must be
used. Store the padlock key in another location.
10 − English
PADLOCK
HOLE
PADLOCK
SWITCH
TRIGGER
SPINDLE
LOCK BUTTON
SWITCH
TRIGGER
Fig. 4