3M Littmann 3200 Manual De Instrucciones página 17

How to transfer real-time data to an external device:
1. Ensure the Model 3200 is paired with the external device.
2. Depress and release the (M) button. Select the CONNECT option by again pressing and releasing the (M) button. The LCD
screen will signal that the Bluetooth link is active. The stethoscope will automatically return to operational status. Consult
application software for details on initiating real-time transfer, the process may vary by computer platform utilized.
When connected by a Bluetooth link, external Bluetooth-enabled devices may take control of the display and keypad of the
Model 3200 stethoscope. The external device may also transfer audio playback or other information through the Model 3200
headset. When the external device transfers audio playback back to the stethoscope, the sounds will be preceded by a beep.
A Bluetooth connection with the stethoscope will automatically be ended if no data transfers occur in a 90 second period.
Alternatively, the connection can be manually ended using the DISCONN (disconnect) option of the Main menu. If you are
listening to the Model 3200 electronic stethoscope using its Bluetooth feature and you exceed the maximum communication
range of approximately 10 meters, you may hear a rapid series of beeps. Should this occur, shorten the physical distance
between your Model 3200 and the Bluetooth equipped device.
15