Angelcare AC117 Guía De Usuario página 71

5.4 ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
To ensure adequate monitoring of your baby's movements, you can adjust the sensitivity of the Sensor Pad. Set a high
sensitivity for a newborn and a lower sensitivity as baby grows and gains weight. A thicker mattress will also need a higher
sensitivity. Slide the Nursery Unit sensitivity level button to select between low, medium or high level.
For optimal results begin with medium sensitivity
level, adjusting the sensitivity by increasing or
decreasing as required.
NOTE:
If you are experiencing false alarms, adjust the
sensitivity level.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older than 24 months.
• Once you are finished using the Sensor Pad, please deactivate the movement function, remove it from the
baby's cot and store it away.
5.5 - SOUND
TO ACTIVATE SOUND:
2
TO TEST SOUND:
Ask someone to speak into the Nursery Unit or place
the unit near a radio to ensure that sound is being
picked up.
IMPORTANT
To avoid feedback (whistling), keep both units at
least 3 meters apart.
All manuals and user guides at all-guides.com
IF YOU HEAR NO SOUND:
• Check that both units are powered ON.
• Check that both units are plugged into functioning
electrical outlets.
• Check the batteries in both units (replace or
recharge them if necessary).
• Bring the Parent Unit closer to the Nursery Unit.
1) Press and hold the MENU Button then press
the OK button until the Sound Monitoring
icon blinks.
2) Using the UP and DOWN arrows to turn the
function ON or OFF.
3) Press the OK button to go to the next setting
or press the EXIT button to confirm your
choice.
E
N
71