Electrolux EWF 14118 Folleto De Instrucciones página 10

Depending on the program, different functions can be
combined. These must be selected after choosing the
desired program and before pressing the "Start/ Add
clothes" button.
By pressing the "Options" button, all the symbol icons,
allowed for the selected programme will appear in the
display (allowed for the selected programme).
The first option will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press
"Change" button. There will appear a line below the
selected icon, indicating that the option is set.
To select the other options press again the «Options»
button and proceed as before.
Once you have completed the selection of the options,
pressing the «Exit» button, the selected icons will
remain fixed in the display.
Note: To modify the already chosen option selections,
repeat the previous procedure.
Important! While selecting the option, if you press the
temperature "Temp.", "Spin" , or "Start/ Add clothes"
button, the relative function will be executed.
EXTRA RINSE: this option can be selected with
all programmes, except the wool
programs and Mini programe
2 rinses for cottons
delicates and silk
This option is recommended for people who are
allergic to detergents, and in areas where the water is
very soft.
TIME SAVING: this option can be used for lightly
soiled cotton, synthetic or delicates items in order to
obtain a good washing program in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature. Selecting this
option «Short» or «Very Short» will be shown in the
display.
DELAY START: this option makes it possible to
delay the starting of the washing program by 30 min -
60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in the
display.
Delay Start
No 10.55
Temp. Spin Options Change
You must select this option after you have set the
program and before you press the Start/Add clothes
button .
1-25 ES Mac64.indd 10 1-25 ES Mac64.indd 10
All manuals and user guides at all-guides.com
,handwash
.The machine will add
and 1 rinse for synthetics
.
Delay Start
Start in 30 min 11.25
Exit Temp. Spin Options Change Exit
you press the "Start/ Add clothes"
have already pressed the "Start/ Add clothes"
button and you wish to cancel the Delay time proceed
as follows:
1. set the washing machine to PAUSE by pressing
the "Start/ Add clothes"
2. deselect the Delay start option, changing the
status;
3. press the "Start/ Add clothes"
the program.
Important!
The selected delay can be changed only after
selecting the washing program again.
The door will locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the "Start/
Add clothes" button. After you have closed the
door, press the Start/Add clothes
The Delay Start cannot be selected with
SPIN/DELICATE SPIN and DRAIN programmes.
PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and handwash
Minipro30 and silk programmes
The Prewash ends with a short spin at 650 rpm in
,
programmes for cotton and synthetic fabrics, whereas
in the program for delicate
drained.
INTENSIVE: for heavy soiled laundry.
This option can be selected only for cottons and
synthetics.
The washing time will be prolonged according to the
cycle temperature and the fabric type.
EASY IRON: selecting this button the laundry is
gently washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the machine
will perform 6 rinses instead of 3 for cotton
rinses instead of 3 for synthetics
can be used for cotton
this option is selected for cotton programmes, the
spin speed automaticaly will reduce to 1000 rpm.
ENERGY SAVING: this option can be selected
only for synthetics lightly or normally soiled with a
temperature of 40°C or higher. The washing time will
be prolonged. If you select 60°C-50°C-40°C, the
washing temperature will be reduced to 42°C.
MENU:
Menu option is used for selecting various basic
settings without affecting the particular wash
programme. These basic settings will remain active
until they are deselected/modified.
To move through the different Menu settings use the
«Options» button.
10
10
button. If you
button;
button to start
button again.
cycle,
).
fabrics the water is only
and 4
. This function
and synthetic fabrics. If
3/4/06 12:45:39 AM 3/4/06 12:45:39 AM