Select The Desired Options - Electrolux EWF 14118 Folleto De Instrucciones

SETTING THE TIME
You should set the time prior to the first wash and
when changing to and from daylight savings time.
See «Clock setting», Menu on page 12.
5. Select the desired
programme/fabric
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear
in the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The Start/Add
clothes button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
6. Select the temperature
Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row
appears the indication of the selected temperature.
COTTON 08.30
MAX 95°C 10.55
40°C 1400
Temp. Spin Options Change
1-25 ES Mac64.indd 18 1-25 ES Mac64.indd 18
All manuals and user guides at all-guides.com
Cotton 08.30
Cycle and at 10.55
60°C 1400
Temp. Spin Options Change Exit
Exit
7. Select the Spin Speed "Spin", the
Rinse Hold or Night cycle
Press the SPIN SPEED button repeatedly, in
order to select the desired spin speed or No Spin «O»
or the Rinse Hold or the Night Cycle
The relevant message will appear on the second row
of the display. The selected spin level will be shown on
the third row next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme with
the water still in the tub.
COTTON 08.30
MAX 1400 10.55
40°C 1200
Temp. Spin Options Change Exit

8. Select the desired options

Depress the relevant buttons to select the required
options.
Depending on the selected programme only
certain options are available and shown during the
selection phase.
Note: Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
9. Select the DELAY TIME
Before you start the programme, if you wish the
starting to be delayed, choose the DELAY option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
The end cycle will be updated and shown on the
relative position of the display.
Delay Start
No 10.55
Options Change Exit
Temp. Spin
18 18
.
options.
Delay Start
Start in 30 min 11.25
Temp. Spin Options Change Exit
3/4/06 12:45:45 AM 3/4/06 12:45:45 AM