Child Lock; Cleaning And Maintenance - Proline GBI23 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
Suppose you want to set the following cooking program:
1. Repeatedly press
2. Turn
to set cooking time.
3. Repeatedly press
4. Turn
to set cooking time.
5. Press
to start cooking.
NOTE: After one cooking stage is finished, a beep sound will be heard, indicating the
next cooking stage has begun. The corresponding indicator light (1S, 2S or 3S)
will illuminate to indicate which stage the oven is operating in.

Child Lock

The child lock prevents unsupervised operation by children.
To set the child lock, press and hold
lock indicator light will illuminate. In the lock state, all buttons are disabled.
To cancel the child lock, press and hold
lock indicator light will go out.

CLEANING AND MAINTENANCE

Disconnect the electrical supply to the oven before cleaning.
General Advice
Frequent cleaning prevents smoke and bad odours during cooking and also sparking
in the oven cavity and around the door seal.
Do not let food deposits or grease accumulate inside the oven cavity or on the door
seal.
If your microwave oven is fitted with a waveguide cover (usually located inside the
oven cavity on the right side wall) it must be kept clean at all times, should food
deposits or grease be allowed to accumulate on the cover, sparking will occur and
may damage your oven invalidating the warranty.
Before any maintenance or cleaning, disconnect the oven from the mains supply and
wait for it to cool to room temperature.
Oven Door
Remove any food deposits and grease between the door seal and oven cavity using a
Microwave cooking (100%)
Microwave cooking (60%)
to set power level 100%.
to set power level 60%.
for 3 seconds then a beep sounds and the
for 3 seconds then a beep sounds. The
10

Publicidad

Tabla de contenido
loading

Tabla de contenido