Emerson ION ECO CF5300BS00 El Manual Del Propietario página 11

5. How to Wire Your Ceiling Fan
5.3
Securely connect the Fan Motor Housing Black Wire to
the Supply Black (hot) Wire using the Wire Connector
(supplied) (Figure 15).
5.4
After connections have been made, turn Wires upward
and carefully push Wires into the Outlet Box, with the
White and Green Wires on one side of the Outlet Box and
position the Black Wires on the other side of the Outlet
Box (Figure 16).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
Figure 15
GREEN
WIRES
WHITE WIRES
Figure 16
11
(Continued)
SUPPLY
BLACK
(HOT)
LISTED WIRE
CONNECTOR
FAN MOTOR
BLACK WIRE
BLACK WIRES