Emerson ION ECO CF5300BS00 El Manual Del Propietario página 18

7. Optional Installation of No-Light Cover
7.3
Disengage the LED Light Fixture Assembly White Wire
Terminal to the Fan Motor Housing White Wire Terminal
(Figure 28).
Disengage the LED Light Fixture Assembly Black Wire
Terminal to the Fan Motor Housing Blue Wire Terminal
(Figure 28).
7.4
Tuck all the Wires and Connectors onto the Fan Motor
Housing.
Reinstall the Disconnected LED Light Fixture Assembly
onto the Light Fixture Plate by aligning and engaging the
keyhole slots of the LED Light Fixture Assembly with the
loosened screw heads on the Light Fixture Plate
(Figure 29).
Rotate the LED Light Fixture Assembly clockwise to
engage the two loosened screws.
With the LED Light Fixture Assembly locked into the
keyhole slots, tighten the two previously loosened Screws.
Reinstall the #8-32 x 10mm Flat Head Screw (previously
removed) into the LED Light Fixture Assembly (Figure 29).
A spare #8-32 x 10mm Flat Head Screw is provided in
parts bag, if needed.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the light fixture plate and the LED light fixture
assembly.
FAN MOTOR
HOUSING
BLUE WIRE
FAN MOTOR
HOUSING
WHITE WIRE
LED LIGHT FIXTURE
ASSEMBLY BLACK
WIRE
LED LIGHT FIXTURE
ASSEMBLY WHITE WIRE
Figure 28
LED LIGHT FIXTURE RETIGHTEN TWO
ASSEMBLY #8-32 x 10mm FLAT
HEAD SCREWS
REINSTALL ONE #8-32 x 10mm
FLAT HEAD SCREW
Figure 29
18
(Continued)