Emerson ION ECO CF5300BS00 El Manual Del Propietario página 7

3. Ceiling Fan Assembly
3.7
Place the Ceiling Cover over the 6" Downrod (Figure 7).
Be sure that the Ceiling Cover and the Coupler Cover are
both oriented correctly (Figure 7).
3.8
Route the two Motor Leads through the Hanger Ball
(Figure 8).
Reinstall the Hanger Ball on the 6" Downrod as follows:
Position the Pin through the two Holes in the Downrod and
align the Hanger Ball so the Pin is captured in the Groove
in the top of the Hanger Ball (Figure 8).
Pull the Hanger Ball up tight against the Pin and securely
retighten the Phillips Head Screw in the Hanger Ball
(Figure 8).
A loose Phillips Head Screw could create Fan wobble.
(Continued)
Figure 7
6" DOWNROD
PHILLIPS HEAD
SET SCREW
Figure 8
7
PIN
HANGER BALL