Emerson ION ECO CF5300BS00 El Manual Del Propietario página 15

6.7
If using the No-Light Cover, skip Sections 6.7 - 6.9 and
go to Section 7.
Securely connect the LED Light Fixture Assembly White
Wire Terminal to the Fan Motor Housing White Wire
Terminal (Figure 23).
Securely connect the LED Light Fixture Assembly Black
Wire Terminal to the Fan Motor Housing Blue Wire
Terminal (Figure 23).
The connections are complete when you hear a soft click.
6.8
Tuck all the Wires and Connectors onto the Fan Motor
Housing.
Install the LED Light Fixture Assembly onto the Light
Fixture Plate by aligning and engaging the keyhole slots of
the LED Light Fixture Assembly with the loosened screw
heads on the Light Fixture Plate (Figure 24).
Rotate the LED Light Fixture Assembly clockwise to
engage the two loosened screws.
With the LED Light Fixture Assembly locked into the
keyhole slots, tighten the two previously loosened Screws.
Reinstall the #8-32 x 10mm Flat Head Screw (previously
removed) into the LED Light Fixture Assembly (Figure 24).
A spare #8-32 x 10mm Flat Head Screw is provided in
parts bag, if needed.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the light fixture plate and the LED light fixture
assembly.
6. Final Assembly
(Continued)
FAN MOTOR
HOUSING
BLUE WIRE
FAN MOTOR
HOUSING
WHITE WIRE
LED LIGHT FIXTURE
ASSEMBLY BLACK
WIRE
LED LIGHT FIXTURE
ASSEMBLY WHITE WIRE
Figure 23
LED LIGHT FIXTURE
ASSEMBLY
REINSTALL ONE #8-32 x 10mm
FLAT HEAD SCREW
Figure 24
15