How To Use; Comb Attachment - Sinbo SHC 4342 Manual De Instrucciones

All manuals and user guides at all-guides.com
a way that the comb attachment lies as flat as possible.
Use the adjustment lever for additional flexibility allowing you to shorten hair gradually
without changing the attachment. By removing the respective comb attachment, i.e. using
the cutting head without any comb you trim clear contours. Please switch off the appliance
immediately after use by moving the ON/OFF switch downwards ("OFF" position).
You can use the hanging loop at the cord for easy storage.

COMB ATTACHMENT

You can choose between 6 comb attachments:
1 = 1/8": 3.0mm cutting length
2 = 1/4" 6.0mm cutting length
3 = 3/8": 9.0mm cutting length
4 = 1/2": 13.0mm cutting length
5/6 = Combs for lateral stair cut
CLEANING, CARE AND DISPOSAL
Cleaning the hair clipper:
Switch the appliance off, unplug it and remove the respective comb attachment if set on.
Use the cleaning brush included to remove any residual hair from the cutting head.
Do not clean the cutting head with water or any other fluid except medical alcohol.
Upon regular use, the cutting head should be occasionally oiled (see illustrations below).
Use only acid-free oil, e.g. sewing machine oil. Wipe off excess oil with a piece of cloth.
DISPOSAL:
Do not dispose the appliance via the normal household refuse. Contact your city
or local authority to find out about the proper, environmentally friendly disposal
of the appliance ("electric rubbish").
SAFETY CAUTIONS
WARNING! Polythene bags over the product or packaging may be dangerous. To avoid
danger of suffocation, keep away from babies and children. These bags are not toys.
• Do not use or leave the appliance where it can become wet or where there is a danger
of it falling into basins or other vessels containing water.
• This appliance should only be used as described within this instruction book. Please
retain for reference.

HOW TO USE

1
3
5
- 6 -
2
4
6