Description Of Parts; Preparing For Use - Sinbo SHC 4347 Manual De Instrucciones

All manuals and user guides at all-guides.com
ENGLISH
SINBO SHC 4347 HAIR CLIPPER
INSTRUCTION MANUAL

DESCRIPTION OF PARTS

1. Clip-on comb attachment
2. Lube
3. Cleaning brush
• Cordless operation
• Stainless steel blades
• Built in battery: 1*600mA Ni-Cd battery
• 8 Hours charing time
• With side attachment comb brush,oil, adaptor charing base
• AC230V, 50Hz, 3W

PREPARING FOR USE

1. The appliance as supplied by the manufacturer is not yet ready for use. It must be
electrically charged prior to use.
2. Insert the plug of the battery charging stand 4 into a socket. Warning! This appliance
must be charged at the specified voltage! You can store the remainder the charging stand
4(230V 50Hz). In order to charge the appliance it should be placed in the battery charging
stand 4 so that the control lamp 5 lights up. While the appliance is being charged, the
switch must be set at "0" (the "0" must be visible). A charging period of 16 hours is
required before initial use. Take care to keep the charging contacts 3 clean, as soiled
charging contacts can interfere with the charging process. Overcharging of the appliance
is not possible.
3. After charging the appliance is ready for use. It can be used with or without the clip-
on comb attachment. To attach the clip-on comb attachment, slide it onto the cutting
head 1 until it clicks into position. The appliance must be switched off while the clip-on
comb attachment is being attached or removed.
4. The clip-on comb attachment is easily adjustable. Simply slide it up or down the cutting
head 1. The hair can be cut to 4 different lengths ranging from approximately 3 mm to
6 mm. The position of the clip-on comb attachment on the cutting head determines the
length of the haircut.
5. After using the appliance, switch if off and replace it in the battery charging stand 4
to be recharged the control lamp 5 must light up. In order to retain the load capacity of
the storage battery we recommend to use the storage battery until it is empty before
reloading.
- 5 -