Disposing Of The Battery - Sinbo SHC 4347 Manual De Instrucciones

All manuals and user guides at all-guides.com
REPLACING THE CUTTING HEAD
Switch the appliance off before replacing the cutting head!
If the performance of the appliance deteriorates after extended use, despite regular
cleaning and maintenance, the cutting head 1 should be replaced(the cutting head can
be ordered as a spare part from the Service Department). First remove the hexagonal
screw on the cutting head 1 by means of the hexagonal spanner attached to the underside
of the charging stand 4 in the direction "-" and remove the old cutting head(Fig.2).
Important: First remove the screw, then remove the cutting head! Place the new cutting
head on the main body of the appliance and screw on place with the spanner (direction
"+").
CLEANING AND MANITEN-ANCE OF THE APPLIANCE
Switch the appliance off before cleaning or carrying out maintenance!
In order to ensure that the appliance remains in perfect working order, it is important
to note the following instruction:
In order to retain the load capacity of the storage battery we recommend to use the
storage battery until it is empty before reloading.
GUARANTEE
This appliance is guaranteed against defects for a period of half a year from purchase.
During that period the purchaser is entitled to free-of-charge correction of any defect.
This guarantee excludes defects caused by improper handing during use and normal
wear and tear.

DISPOSING OF THE BATTERY

When you discard your shaver in due course, please remove the battery. Do not throw
the battery away with the normal household waste. But hand it in separately at an officially
assigned collection point.
- 6 -