Etac molift Raiser Pro HeelStrap Instrucciones De Ensamblaje página 4

Molift Raiser Pro / www.etac.com
Assembly instructions
83211
Raiser Pro HeelStrap
BM49001 2020 / 09 / 21
Read the Raiser Pro main User Manual before use!
It is important to fully understand the content of the main user man-
ual before attempting to use the equipment. The main User Manual
for Molift Raiser Pro contains important safety instructions and infor-
mation regarding the use of the Molift Raiser Pro. Scan the QR code
below to find the main user manual for Molift Raiser Pro and addi-
tional documentation.
Raiser Pro Heelstrap
Raiser Pro HeelStrap HeelStrap is an accessory to be used when the
patient needs support to maintain the feet in the correct position when
standing on the baseplate of the Raiser Pro. The product shall be mount-
ed onto the Molift Raiser Pro turning knobs. The HeelStrap has two holes
on each side and can be adjusted into 3 different length. The HeelStrap
shall provide support against the user's heels.
Assess the risk and take notes.
You as the assistant are responsible for the safety of the user.
Revise therisk-assessment as often needed due to the patient´s condition.
Actions to be performed daily or before use:
- Make sure the user has the required ability for the use of the HeelStrap
- Make sure the HeelStrap does not have visible damage or frays.
Material and cleaning instruction
Molift Raiser Pro HeelStrap is made out of Silicone.
Use 70 % alcohol or 45% isopropanol for cleaning and disinfection
The wheels must be locked before the heel strap is
mounted onto the knobs
170 375
Find out witch combination to be used for
each user.
4
3 - longest lenght
2 - middle lenght
1 - shortest lenght
Material recycling
identification
Manufacturing year
Manufacturing mounth