Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
R4DW-X S
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions are
with the tool when it is given to other per-
sons.
Contents
Printed: 07.07.2013 | Doc-Nr: PUB / 5070502 / 000 / 00
1. Safety Rules
ALWAYS follow maintenance and operation instructions
contained in this manual.
NEVER exceed the maximum rated pressure (175 PSI
or 12 bar) for your tool.
NEVER leave a loaded tool unattended while it is con-
nected to air.
NEVER remove or tamper with the operation of the trig-
ger or the safety return spring on your air tool. Check
the safety yoke and trigger daily to ensure they operate
freely and correctly. DO NOT use a tool that is not oper-
ating properly. Have the tool serviced periodically by a
qualified technician to check for worn or damaged parts,
and to keep the internal components clean.
NEVER load the tool until you are ready to use it. DO
NOT depress the trigger during loading.
NEVER point the tool at yourself or anyone else.
AVOID unfavorable body positions. Work from a secure
stance and stay in balance at all times.
NEVER carry the tool with the trigger depressed.
DO NOT use oxygen, combustible gases or high pres-
sure compressed gas tanks as the air supply for the tool.
ALWAYS use authentic Hilti R4DW-X S fasteners and
parts in your tool.
SAFETY equipment such as safety glasses, hearing pro-
tection and hard hat should ALWAYS be worn by the
operator and bystanders when the tool is in use.
Page
1
ALWAYS disconnect the air supply and empty the mag-
2
azine before:
2
work breaks
●
changing parts
●
2
servicing or inspecting tools or clearing a jammed fas-
●
2
tener
3
storing tool at the end of the day
●
3
when leaving the tool unattended
●
3
4
NEVER install female couplers on the tool since they
may store air in the tool even after the air supply is dis-
connected.
5
ALWAYS connect air supply to the tool before loading
7
fasteners.
8
en
1
Publicidad
Capítulos
Tabla de contenido
